How to Identify Colors When You're Color Blind

Which colors are hard to tell apart with color blindness, how to read an HSL hue number, and how to get a reliable color reading from a phone camera.

Colors in this guide

Two shirts lie on the bed. One is supposed to be green and the other brown, and from where you are standing they look like the same muddy color. Or a chart in a meeting uses red for losses and green for gains, and both lines look identical to you.

If you have color vision deficiency, the condition usually called color blindness, you have probably built up workarounds already: asking someone, reading labels, remembering which item is which. This guide adds one that works on almost anything you can point a phone at.

It covers which colors tend to be confused and why, how to identify a color from a text label or a hue number instead of from the color itself, how to get a reading you can trust from a phone camera, and the situations where a color identifier app should not be used at all.

The short answer

The most reliable way to identify a color when you are color blind is to stop judging the color and read a label for it. A color identifier app turns what a phone camera sees into text: a color name, a HEX code, and an HSL hue number. Take the reading in even daylight, sample more than once, and let the hue number decide when the name seems wrong.

What color blindness changes

Color vision deficiency means seeing colors differently from most people, and it is common. According to the National Eye Institute, about 1 in 12 men have it, men are at much higher risk than women, and most people with it were born with it. The most common type makes red and green hard to tell apart.

Most people with color blindness still see plenty of color. The difficulty is with specific pairs, and which pairs depends on the type:

  • Red-green types are the most common. Deuteranomaly, the most common red-green type, makes some greens look redder, while protanomaly makes some reds look greener and less bright. Protanopia and deuteranopia make red and green impossible to tell apart.
  • Blue-yellow types are less common. They make blue hard to separate from green, and depending on the type, yellow from red or pink, and purple from red.
  • Complete color blindness, also called monochromacy or achromatopsia, means no colors are seen at all. It is rare.

The NEI’s page on types of color vision deficiency describes each type in more detail.

Color pairs that are easy to confuse

Most of the pairs below come from the NEI’s descriptions and from the Cleveland Clinic’s overview of color blindness, which notes, for example, that with protanopia red can be hard to tell from black and dark colors such as brown may look green or orange. Each example is a real color code with its HSL hue, the number explained in the next sections.

Often confused Example A Example B Most linked to
Red and green #B5352B
hue 4°
#4E7A2C
hue 94°
Red-green types
Green and yellow #5F9E45
hue 102°
#D8C23A
hue 52°
Deuteranopia
Brown and green #7A5230
hue 28°
#556B2F
hue 82°
Protanopia
Dark red and black #5C1414
hue 0°, saturation 64%
#1F1F1F
saturation 0%
Protanopia
Blue and purple #3949AB
hue 232°
#6A3FA8
hue 265°
Red-green types
Blue and green #2F7FB0
hue 203°
#2FA36B
hue 151°
Blue-yellow types
Yellow and pink #F2E08A
hue 50°
#F2A0B5
hue 345°
Tritanopia

Blue and purple belong on the list for a mechanical reason. Purple is blue mixed with red, so when red looks dimmer or harder to see, purple loses the part that separates it from blue.

If two swatches in a row look alike to you, look at the numbers beside them. That gap is what the rest of this guide uses.

Why a text label beats a color swatch

Many color tools answer with a large patch of the sampled color. For someone with color vision deficiency, that only moves the problem. The patch is still a color you have to judge, and it can look exactly like the patch for the color you were trying to rule out.

What helps is output that does not depend on seeing color at all: words and numbers. A color identifier typically gives you three of them, and each has a different job.

  • Color name. The friendliest answer, such as Firebrick or Olive Drab. It is also the least precise, because it is the nearest match from a fixed list of names.
  • HEX code. An exact value such as #4E7A2C. Hard to interpret at a glance, but perfect for comparison: two readings with the same code are the same color, and a code can be pasted into a message or a shopping search.
  • HSL hue. A single number from 0 to 360 that places the color on the color wheel. For telling color families apart, it is the most useful of the three.

The difference between names and codes has its own guide, color names vs color codes, if you want the longer explanation.

How to read an HSL hue number

HSL describes a color with three values, and you need all three to read it correctly.

  • Hue is the position on the color wheel, from 0° to 360°.
  • Saturation is how colorful the color is, from 0% (pure gray) to 100% (fully vivid).
  • Lightness is how dark or light it is, from 0% (black) to 100% (white).

The hue is the part that names the color family. These ranges are approximate, and neighboring ranges blend into each other, but they hold up well in practice:

  • 0° to 15° and 345° to 360°: red
  • 15° to 45°: orange
  • 45° to 70°: yellow
  • 70° to 165°: green
  • 165° to 200°: teal and cyan
  • 200° to 255°: blue
  • 255° to 290°: purple and violet
  • 290° to 345°: magenta

Three everyday color names are not separate hues at all. Brown is a dark orange or red, pink is a light red or magenta, and olive or khaki is a dark or muted yellow. Lightness is what moves a color into one of those names, so a hue of 28° at 33% lightness, like the brown in the table, reads as brown rather than orange.

Check saturation before you trust the hue

A gray has no hue. When saturation is near 0%, the hue number is meaningless even though it is still printed. A black T-shirt might read HSL(0, 0%, 12%), and that 0° does not mean red. It means there is no color to place on the wheel.

As a working rule, treat anything under about 10% saturation as gray, black, or white, and only read the hue once saturation is clearly above that. The extremes of lightness work the same way: below about 10% or above about 95% lightness, a color looks black or white whatever the other two numbers say.

Use lightness to separate dark colors

Very dark colors are hard for anyone to judge, color blind or not. Lightness tells you a color is dark, and saturation tells you whether it is a dark color or simply black.

The classic example is navy versus black. A navy sock might read HSL(222, 37%, 19%): dark, but with a hue in the blue range and real saturation. A black sock reads something like HSL(0, 0%, 11%). Both are dark, but only one of them is blue. The same check separates a deep burgundy from black, which matters for the dark red and black pair in the table above.

When the name and the hue disagree, trust the hue

Color names come from a fixed list, and the closest entry wins. Bright, clear colors usually land on a sensible name. Dark and muted colors sit between several entries, so the nearest name can belong to a neighboring family.

ColorSnap, for example, matches readings against a list of roughly 110 named colors. The dark olive green #556B2F from the table has a hue of 82°, firmly in the green range, yet its closest list entry is Coffee, which belongs to the Brown family.

For someone trying to tell brown trousers from green ones, that is exactly the wrong label to rely on alone. The hue number does not have this problem, which is why it should break the tie.

If HSL is new to you, the comparison of HEX, RGB, and HSL explains how the three formats describe the same color.

How to identify a color with your phone camera

A color identifier app is only as good as the image it reads. The NEI itself mentions apps that let you photograph something and tap part of the photo to find out its color. The steps below make that reading dependable. They use the Live Camera Color Picker in ColorSnap, an Android app, as the example, but the same habits apply to any camera-based identifier.

  1. Get even light. Daylight near a window is best. Warm bulbs push colors toward orange and cool LEDs push them toward blue, and the camera records the color of the light along with the object. In a dim closet, ColorSnap’s torch can help on phones that support it, but keep it off shiny fabrics, where it causes glare.
  2. Get close. Fill as much of the frame as you can with the item. The live picker has 1×, 2×, and 3× zoom presets for small things such as a button, a thread, or a cable label.
  3. Aim at a plain, representative patch. Avoid seams, folds, shadows, printed logos, and bright highlights. You want the part of the surface you would describe to someone else.
  4. Lock the reading, then read it. Lock Color holds the result so it stops changing as your hand moves. Read the name first, then confirm with the HSL value using the ranges above.
  5. Check the consistency label. ColorSnap reports how uniform the sampled area was, with labels from Very consistent down to Mixed area and High color variation. A low score means the sample landed on more than one color, such as a pattern, a heathered knit, or the edge between two parts.
  6. Take a second reading somewhere else on the item. If both readings put the hue in the same range, you have your answer. If they disagree, the item may be multicolored, or the light may be uneven.
  7. Save or share when it matters. Save to History keeps the name and HEX code on the phone for later. Share Color sends the result to someone you trust for a second opinion.

Lighting has a bigger effect on camera readings than most people expect. The camera color identifier guide covers white balance and distance in more depth, and why a color picker gives different HEX codes explains how sample size and sampling method steady a reading on textured surfaces like knitwear.

For colors on a screen, use a screenshot instead

Charts, maps, game interfaces, and color-coded spreadsheets are easier than physical objects. Take a screenshot and open it from the gallery instead of pointing the camera at the screen. A screenshot stores the exact color the screen was drawing, with no lighting, glare, or camera processing in the way. The guide to identifying a color from a photo walks through picking a precise point in an image.

Everyday situations where a color reading helps

  • Getting dressed. Navy or black, brown or green, a gray sweater that might be pale pink. Once you have identified an item, mark it with a tag, a safety pin, or a dedicated drawer so you only have to check once.
  • Charts and maps. Screenshot the chart and sample each line or region, then match the hue to the legend.
  • Hobbies and crafts. Yarn, embroidery thread, paint tubes, and beads lose their labels. A quick reading puts the right name back on them.
  • Describing a color to someone. “The blue one” is ambiguous. A HEX code is not, and it can be sent in a message.
  • Comparing two items. When you need to know whether two things match, sample both under the same light and compare the hue and lightness values rather than the swatches.

When not to rely on a color identifier

Camera readings are approximations. ColorSnap’s own accuracy notice says that lighting, shadows, reflections, white balance, and camera processing may affect the detected color. That is fine for clothes and charts. It is not fine for anything where a wrong answer is dangerous.

  • Traffic signals and safety lights. Rely on the position and order of the lights and on the rules you already use, not on a phone.
  • Electrical wiring and cable color codes. Use a tester, check the documentation, or ask a qualified electrician.
  • Medical, pool, or chemical test strips. Follow the product’s instructions or ask a pharmacist or clinician to read the result.
  • Exact paint, dye, or fabric matching. These need physical samples compared under controlled light, not a photograph.

A color identifier also cannot tell you whether you have color vision deficiency. Diagnosis is done by an eye doctor, most often with a color plate test, and the NEI’s page on testing for color vision deficiency explains what to expect.

If you think you or your child may be color blind, or your color vision seems to have changed rather than always being this way, talk to an eye doctor. The NEI notes that eye disease, some medicines, and cataracts can affect color vision later in life.

Other tools that help

A camera identifier is one tool among several, and they work well together.

  • Android color correction. Google’s Android accessibility help describes color correction and grayscale settings that help a device compensate for color blindness, under Settings > Accessibility > Color and motion > Color correction. Wording can differ between phone makers. This setting changes the screen, not the world around you.
  • Glasses and contact lenses. The NEI notes that special glasses and contact lenses may help some people tell colors apart. They do not cure color vision deficiency.
  • A labeling system. Tags, a consistent storage order, and labeled containers turn a one-time identification into something you never have to repeat.
  • Another person. Still the fastest check when someone you trust is nearby.

If you design for people with color vision deficiency

If you make charts, interfaces, or signs, the same problem shows up from the other side. The W3C accessibility guideline Success Criterion 1.4.1, Use of Color, a Level A requirement, says color must not be the only visual means of conveying information, indicating an action, prompting a response, or distinguishing an element.

In practice, that means adding a second signal alongside color: text labels on chart lines, icons next to status colors, patterns or line styles in graphs, and underlines on links. A difference in lightness also tends to survive color blindness better than a difference in hue alone. The color contrast checker guide shows how to measure that difference.

Read the label, not the look

When a color is uncertain, the reliable move is to turn it into words and numbers. Use the name as a first hint, confirm it with the HSL hue, check saturation and lightness for dark or grayish colors, take readings in good light, and keep safety decisions out of the app entirely.

To see how photo and camera identification works in ColorSnap, read about the Android color identifier, or browse the other photo color picker guides.

Questions

Frequently asked questions

Can a phone app tell me what color something is?

Yes. A color identifier app reads the color from the camera or from a photo and reports it as text, usually a color name plus codes such as HEX and HSL. The National Eye Institute lists apps like this among the tools that help people with color vision deficiency tell colors apart. Lighting and camera processing affect the result, so take more than one reading when the answer matters.

Do color identifier apps fix color blindness?

No. A color identifier labels the colors in front of the camera. It does not change how your eyes see color. There is no cure for inherited color vision deficiency, and most people adjust to it with tools and habits such as reading color labels, organizing belongings, and asking someone they trust.

Can color blind people see any colors?

Most can. The common forms of color blindness make certain pairs of colors hard to tell apart, most often red and green, while many other colors look distinct. Complete color blindness, where no colors are seen at all, is called monochromacy or achromatopsia and is rare.

Does Android have a color blind mode?

Android includes a Color correction setting, found under Settings > Accessibility > Color and motion on many phones, that adjusts screen colors to help with color blindness. Menu wording can differ between manufacturers. Color correction changes what the display shows, not the objects around you, so it works alongside a camera color identifier rather than replacing one.

Can a color identifier app test me for color blindness?

No. Color vision deficiency is diagnosed by an eye doctor, most often with a color plate test. If you think you or your child may have color vision deficiency, or your color vision seems to have changed, talk to an eye doctor.

Is a color identifier accurate enough to match clothes?

It is usually accurate enough to tell color families apart, such as navy from black or green from brown, when the reading is taken in even daylight and repeated in a second spot. It is not precise enough for exact dye or paint matching, which needs physical samples compared under controlled light.

Start from the ColorSnap homepage or review the complete app features. For focused workflows, learn about the color identifier for Android and iOS, use the photo color picker, or explore the image palette generator. The ColorSnap FAQ answers common questions about formats, images, saved colors, and app usage.

Keep reading

Related guides

ColorSnap for Android, iPhone & iPad

Identify colors from photos with ColorSnap

Sample a color from any photo on Android, iPhone or iPad and get its name, its HEX code, and the palette around it.

Explore App Features